Specialised Technical Services News

KeyCreator 7.0.1 Released

Thu, 04 Oct 2007 00:00:00 GMT

Kubotek has announced the release of the Latest KeyCreator 7.0.1
KeyCreator 7.0.1 can be installed alongside the any previous releases: 5.2.1, 5.5.1, 6.0.2, 6.3, 6.5.2.
KeyCreator 7.0.1 will require new License from kubotekusa.com
File saved in 7.0.1 will not open in previous versions.
The Latest version can be downloaded at www.kubotekusa.com (Login required) STS recommended customer to use the setting export function to backup their Customised Setting
Please do not hesitate to contact STS for any additional information you may require.

Extended KeyCreator 6.5.2 Special Offers

Mon, 02 Jul 2007 00:00:00 GMT

Due to popular demand we extended the special offer for KeyCreator 6.5.2 until end of July!
check out our current price list for more information

KeyCreator 6.5.2 Released

Fri, 01 Jun 2007 00:00:00 GMT

Kubotek has announced the Service Pack update of KeyCreator to 6.5.2
KeyCreator 6.5.2 can be installed alongside the following 6.x releases: 6.0.0, 6.0.1, 6.0.2, and 6.3.0. But it will replace any installation of 6.5.0.
KeyCreator 6.5.2 can use the same License as the previous 6.x releases.
File saved in 6.5.2 will not open in previous versions.
You will need to uninstall 6.5.0 before installing 6.5.2 IF you choice to use the full install
The Patch can be downloaded at www.kubotekusa.com (Login required) STS recommended customer to use the setting export function to backup their Customised Setting
Please do not hesitate to contact STS for any additional information you may require.

May 07 E-Comm Newletter

Fri, 18 May 2007 00:00:00 GMT

STS May 07 E-Comm Newletter

KeyCreator 6.5 Released

Tue, 29 May 2007 23:34:34 GMT

Kubotek has announced the Minor version update of KeyCreator to 6.5.0
KeyCreator 6.5 can be installed alongside any of the previous 6.x releases (6.0.2 and/or 6.3.0).
KeyCreator 6.5 can use the same License as the previous 6.x releases.
File saved in 6.5 will not open in previous versions.

ZwCAD 2007 been released

Tue, 03 Apr 2007 00:00:00 GMT

refer to ZwCAD.com.au for more information

VISI April 07 Newsletter

Mon, 26 Mar 2007 00:00:00 GMT

VISI April 07 Newsletter

KeyCreator 6.3 Released

Tue, 30 Jan 2007 05:00:00 GMT

Kubotek has announced the Minor version update of KeyCreator to 6.3 with the New DDE Technology. Read more about DDE on Creation Engineering News from Kubotek USA (Newsletter January 07)

Kubotek USA Newsletter January 2007

Tue, 30 Jan 2007 00:00:00 GMT

Click here to read Creation Engineering News from Kubotek USA (Newsletter January 07).

VISI February 07 Newsletter

Mon, 22 Jan 2007 00:00:00 GMT

VISI February 07 Newsletter

November 06 E-Comm Newletter

Mon, 27 Nov 2006 00:00:00 GMT

STS November 06 E-Comm Newletter

VISI December 06 Newsletter

Mon, 20 Nov 2006 00:00:00 GMT

VISI December 06 Newsletter

Kubotek USA Newsletter November 06

Thu, 16 Nov 2006 00:00:00 GMT

Click here to read Creation Engineering News from Kubotek USA (Newsletter November 06).

End of Year Sale!

Thu, 09 Nov 2006 00:00:00 GMT

End of The Year 2006 special offer!
Discount available to keyCreator, REALyze, Machining strategist, Visi Series & ZwCAD!!
Please go here for more detail. Offer expire 22 December 2006

ZwCAD November 2006 Update

Thu, 02 Nov 2006 00:00:00 GMT

ZwCAD has release the November 2006 Update. go to ZwCAD for more information and download

machining STRATEGIST 8.0.275 released!

Wed, 11 Oct 2006 00:00:00 GMT

machining STRATEGIST 8.0.275 has been released! go to Vero Website for more information.

"CAD/CAM for Colleges" Seminar

Mon, 09 Oct 2006 00:00:00 GMT

"CAD/CAM for Colleges" Seminar
@ Chisholm Institue Dandenong on 17 and 24 November 2006
Click here for more detail.
and here to register.

Kubotek USA Newsletter September 06

Tue, 03 Oct 2006 00:00:00 GMT

Click here to read Creation Engineering News from Kubotek USA (Newsletter September 06).

ZwCAD Newsletter Auguest 06

Tue, 05 Sep 2006 00:00:00 GMT

Click here to read ZwCAD Newsletter August 06.

Kubotek USA Newsletter August 06

Fri, 25 Aug 2006 00:00:00 GMT

Click here to read Creation Engineering News from Kubotek USA (Newsletter August 06).

VISI August 06 Newsletter

Mon, 24 Jul 2006 00:00:00 GMT

VISI August 06 Newsletter

Kubotek USA Newsletter June 06

Wed, 14 Jun 2006 00:00:00 GMT

Click here to read Creation Engineering News from Kubotek USA (Newsletter June 06).

Kubotek USA Newsletter May 06

Wed, 31 May 2006 00:00:00 GMT

Click here to read Creation Engineering News from Kubotek USA (Newsletter May 06).

VISI June 06 Newsletter

Tue, 30 May 2006 00:00:00 GMT

VISI June 06 Newsletter

KeyCreator 5.5.1 released!!

Wed, 24 May 2006 00:00:00 GMT

Keycreator 5.5.1 has been released and is available for downloading. There is a full download and also a binary patch for upgrading from KC5.5.0. If you have KC5.5.0 loaded and use the full download, then you must uninstall KC5.5.0 first. KC5.5.1 can coexist with KC5.2.x and prior versions. No new licensing is required.

Corrected issues on 5.5.1 (pdf)

Download the update from kubtekusa website (customer login required)

ZwCAD 2006 Special offer: $375

Mon, 15 May 2006 00:00:00 GMT

ZwCAD 2006 has been released on 15 May 06!!
Special Introductory Offer!! $375* inc. GST & Shipping within Australia
Contact STS now to receive this huge offer.Offer expires 31 July 06
* This offer only available within Australia. for anywhere else, please check www.zwcad.com for your local dealer detail.

May 06 E-Comm Newletter

Mon, 08 May 2006 00:00:00 GMT

Read STS E-Comm newsletter May 06 in pdf format
http://www.sts.com.au/e-comm/E-Comm.0605.pdf

Special offer on KeyCreator and REALyze

Thu, 04 May 2006 00:00:00 GMT

From now until end of June 2006, STS is giving special discount on all KeyCreator, REALyze and ZwCAD Products, including reactivation, Upgrade and new seats.
Contact STS for more detail.

STS on Austech 2006 Exhibition

Fri, 28 Apr 2006 00:00:00 GMT

STS will be co-exhibiting with Hi Tech Metrology on Stand # D80 and MultiCAM Systems on Stand # D60, at the Austech 2006 Exhibition in Sydney on Thursday 1st June and Friday 2nd June 2006.
We look forward seeing you there to provide a preview of the latest features of Machining STRATEGIST V7.1 KeyCreator 5.5, VISI 13.1 and ZWCad 2006

KeyCreator 5.5.0 Released

Thu, 20 Apr 2006 00:00:00 GMT

Kubotek has announced the Minor version update of KeyCreator to 5.5.0 Read more at http://www.sts.com.au/news/kc550.shtml

VISI April 06 Newsletter

Tue, 11 Apr 2006 00:00:00 GMT

VISI April 06 Newsletter

Upcoming KeyCreator training class

Fri, 07 Apr 2006 00:00:00 GMT

Upcoming KeyCreator Training classes at Chisholm Institute Dandenong
1. KeyCreator Introduction
2. KeyCreator for CADKEY Users
Detail: 4th May 06 (thursday) 5:30pm - 9:30pm for 10 weeks
Location: Chisholm Institute Dandenong
Address: 121 Stud Road Dandenong
For more information and registration please contact:
Mr. Rodger Boyd
Tel: (03) 9212 5348
Email: r.boyd (at) chisholm.vic.edu.au

Kubotek USA Newsletter March 06

Thu, 06 Apr 2006 00:00:00 GMT

Click here to read Creation Engineering News from Kubotek USA (Newsletter March 06).

VISI-Series Preview - MCAD Magazine April 06

Sat, 01 Apr 2006 00:00:00 GMT

Click here to read VISI-Series Preview on MCAD Magazine April 06

Kubotek USA Newsletter Feb 06

Fri, 03 Mar 2006 00:00:00 GMT

Click here to read Creation Engineering News from Kubotek USA (Newsletter Feb 06).

KeyCreator 5.2.1 has released!

Thu, 23 Feb 2006 00:00:00 GMT

Kubotek has announced the release of KeyCreator 5.2.1
This is a Service Pack for KeyCreator 5.2.0
* This does not require a new license file. You can continue to use your current license file from KeyCreator 5.x
* This Service Pack does not represent a file format change from 5.2.0
* This install replaces KeyCreator 5.2.0, it does not install alongside of it. As such, you'll have two options
-- Uninstall KeyCreator 5.2.0 and install the new KeyCreator 5.2.1
Or
-- Use the new patch to update your install. Note that this patch is larger than any we have made before (88MB) due to changes in an ACIS service pack, but it is still smaller than a complete install (238MB) and will not require the uninstall/reinstall to place on a fresh 5.2.0.
More Information about this release...

Introducting ZwCAD 2005

Fri, 10 Feb 2006 00:00:00 GMT

ZwCAD is a powerful CAD solution which provides a high quality but low-cost CAD solution to many users.
Read more about ZwCAD...

VISI-Series 13.1 Released

Fri, 10 Feb 2006 00:00:00 GMT

Vero has released 13.1 update.
Read more about 13.1 on Vero Website